Specialty Materials ColorJet Heat Transfer Film
Use ColorJet™ III to decorate t-shirts with your water-based/pigmented desktop inkjet printer! ColorJet™ III is an opaque white material with a matte finish, coated for water-based inkjet printing. Use inkjet “print and cut system” or cut by hand. You can apply ColorJet™ III with heated hand iron and firm downward pressure. Make sure that the print is thoroughly dry before pressing! Both products are available in packages of 8½” x 11″ and 11″ x 17″ sheets for easy use with desktop inkjet printers. ColorJet™ III Dark CJ3-2175 One-step printing for dark fabrics. This is an opaque material. Be sure to print the design ‘right-reading’. We do not recommend using a transfer mask – instead – cut around the design, peel off the backing and place down on the garment with Teflon or Transfer Tissue (included in pack) on top, before pressing. ColorJet™ III Light CJ3-2185 One-step printing for light colored fabrics. When printing, reverse the design and then the carrier becomes the transfer mask when heat-pressing! When heat-activated, this material becomes clear.